Prouduct

Recommended products and services

• Analog Signal Temperature Sensor

  Analog signal temperature sensor has two types: voltage output (three-wire system) and current output (two-wire system). The sensor has excellent quality, fast response, strong anti-interference ability and high cost performance. Each sensor chip is calibrated in an extremely precise constant greenhouse, using a mirror condensation dew point meter as a reference.

• Black Plastic Type G1/2 BSP Outer Thread Water Flow Sensor

  Magnetic flow switch can output ON or OFF signal accordingto the flow, it is an important component of the fluid flow control system.When the flow in thepipe is lager than start-up volume,magnetic valve core is forced by the flow pressure to move forward then trigger the reed switch. When the flow recrease to a volume smaller than start-up volume,magnetic valve core is forced back to theoriginal place by the repellant force of the reset magnet, the reed switch recovers.

• Soway Magnetic Proximity Switch Position Sensor For Security Door Alarm System

  Our switches are designed based on the principle of dry reed switch. When using a permanent magnet to drive a reed switch,the ON-OFF region will vary depending on the type of switch used, its pull-in value and the size and force of the permanent magnet. Soway has the solutions for proximity, level, speed, and flow sensing needs with a broad range of reed switch offerings.

• Ultrasonic Level Transmitter For Liquid Tank Level Monitoring And Measurement

  Ultrasonic liquid level meter sends out ultrasonic pulse by sensor (transducer). The sound wave is received by the same sensor or an ultrasonic receiver after it is reflected by the liquid surface and is converted into electrical signal through a piezoelectric crystal. The transmission time of the sound wave is proportional to the distance from the sound wave to the surface of the object, the distance from the sensor to the surface of the measured liquid (solid) is calculated by the time between the transmission and reception of the sound wave.

• Mini Integrated Ultrasonic Diesel Fuel Tank Level Sensor For Smart Monitoring

  Ultrasonic liquid level meter sends out ultrasonic pulse by sensor (transducer). The sound wave is received by the same sensor or an ultrasonic receiver after it is reflected by the liquid surface and is converted into electrical signal through a piezoelectric crystal. The transmission time of the sound wave is proportional to the distance from the sound wave to the surface of the object, the distance from the sensor to the surface of the measured liquid (solid) is calculated by the time between the transmission and reception of the sound wave.

• Explosion-Proof Type Magnetic Contact Switch

  Our switches are designed based on the principle of dry reed switch. When using a permanent magnet to drive a reed switcPX133-Ex-proof proximity switch is ideal switch for industrial automation, is widely used in door switch, metallurgy, mining, electricity, construction and other industries. Do spacing, positioningdetection uses. magnet or actuator is less than or equal 7mm distance to install.

• Cement Drum Rotation Sensor Concrete Mixer Unloading Sensor

  SPH3A0 series positive and reverse tachometric transduce is detected by Hall principle, which only needs to fix two corresponding magnets on the axis and wheel (two magnets are distributed symmetrically, and the N pole of one magnet must face to the sensor, and the S pole of the other magnet must face to the sensor), and fix the arrow of the detection surface of the sensor probe to face the arc of the magnet rotation.

• Water Liquid Tank Level Meter Fuel Level Sensor For Arduino

  Capacitancefuel level sensors operate on the basic principle of the linear variation of the electrical capacity formed between the inner and outer shell with the content shifty, transformed variation of the content level to 4~20mA, 0~5V, RS232, RS485 etc., could display liquid level height directly or be sent to the remote monitoring and control system by satellite.